Slide Units
Our Products
With dual non-rotating rods, Flat housing/tubing in high strength Aluminum, Flat oblong cylinder Ø 40 mm for push and pull forces of 600/500 N, Simultaneously moving rods in Bronze / Graphite Bushings
With dual guide, Flat housing of high-strength aluminium material and mounting areas on three sides, Driven by oval-shaped oblong cylinder Ø 63 mm for thrust and tensile forces of 1400 N, Simultaneous
With toggle lock function, Flat housing in mono-block design of high-strength aluminium material, High thrust and tensile forces via toggle-joint transmission of up to 4 kN in the dead-centre position
With toggle lock function, Flat housing in mono-block design of high-strength aluminium material, Driven by an integrated pneumatic cylinder Ø 60 mm operating the push rod via toggle-joint mechanism,
Double pistonrod version with toggle lock function, Flat housing in mono-block design of high-strength aluminium material, Pneumatic cylinder Ø 50 mm integrated into the housing, which synchronically
Rigid housing, Aluminum plates with screw and dowel construction, Slide guide 2 precision rods, 4 Bronze / Graphite Bushings for strokes to max. 200 mm, 2 Pneumatic cylinders Ø 60 mm integrated in sli
Aluminium base plate with two rigid guides and a double-guided slide; drive unit with multi-force cylinder in flat design with mechanic end position lock, for max. strokes of 500 mm.
Combination of linear guide and pneumatic cylinder, equipped with a multi power cylinder, which guarantees a locked end position and force intensification. Double guide rods allow total strokes of up
Solid, fully enclosed housing, High quality re-circulating linear ball bearings enclosed in housing, Driven by pneumatic cylinder Ø 50-63 mm, End position locking by toggle-lock mechanism, Position in
Solid, fully enclosed housing, High quality re-circulating linear ball bearings (Brand: Star) enclosed in housing, Driven by two pneumatic cylinders Ø 80 mm, Four rigid guide posts with Bronze-Graphit
