Special Clamps
Our Products
Compact Clamp with toggle-joint mechanism operating two clamping arms, Over-centre lock, Enclosed aluminium housing, Oval-shaped cylinder, sizes 40,63, Two forked clamping arms with standard hole patt
Toggle-joint clamp with electric motor instead of pneumatic cylinder, A re-circulating ball screw instead of a piston rod operates the mechanics driving the clamping arm, Drive 42 V, 240 V, 400 V
Special water-protected clamp according to IP65 with toggle joint mechanism and continuously adjustable opening angle, over-centre-lock. Encapsulated two-part special housing, anodised, bearing with e
Expanding pins with pneumatic drive for clamping and centring operations in borings and component openings, optionally with pin-pulling function (dual cylinder). Fully enclosed housing in aluminium co
Bolt-retained mounting, Optional right or left swivel movement, 90° swivel radius, Base body of aluminium with integrated pneumatic cylinder and swivel mechanism, Mounting via external thread, Optiona
Block design, 90° swivel radius, Optional right or left swivel movement, Base body of aluminium with integrated pneumatic cylinder and swivel mechanism, Mounting possibilities on several sides, Rubber
Clamping arm Standard, Clamping arm for contoured blocks, Mounting adapter for clamping arm, Threaded flange, Lock nut
Pneumatic Linear Gripper in C-frame design, driven by linear cylinder with double guide rod. C-frame in aluminium design with mounting hole pattern on the back and adapter for contour blocks on the ja
Clamping and moving into position with one unit, Robust linear guidance mounted to base plate, Angle adaptor for connection to clamps type V50/63 or K50/63, Joint pieces which, due to their eccentric
